制袋机制袋时，袋长短不一样的产生因素_新闻动态_全自动制袋机,气泡膜制袋机,三边封制袋机-河北厂家价格

新闻动态

当前位置：网站首页 > 新闻动态 > 详细信息

制袋机制袋时，袋长短不一样的产生因素

添加时间：2018/10/23 17:04:19 浏览次数：

1
One
塑料制袋机光电头上的灰尘多。当光电控制器上面的灰尘太多的时候，会影响到激光的光度和强度，这样就不能很准确的控制好塑料袋的长短问题。
There are many dust on the photoelectric head of plastic bag making machine. When there is too much dust on the photoelectric controller, it will affect the luminosity and intensity of the laser, so it can not be very accurate control of the length of plastic bags.
2
Two
塑料制袋机光电头设备问题。由于有些商家的制袋机质量无法保证，使用了劣质的光电头配件，造成敏感度不达标，解决办法是更换光电头。
The photoelectric head equipment of plastic bag making machine. Because the quality of some bagging machine can not be guaranteed, the use of inferior optoelectronic head accessories, resulting in sensitivity is not up to standard, the solution is to replace the optoelectronic head.
3
Three
塑料制袋机运行的速度过高。使得一些配套配件无法更上节奏，应该降低速度进行测试。
Plastic bag making machine runs too fast. So that some accessories can not be more rhythmic, should be reduced speed test.
4
Four
纵封刀烫布卷的过紧。增加了送料的压力。
The blade is too tight. The pressure of feeding is increased.
5
Five
塑料制袋机的送料和下压装置不同步。送料过快、过慢或者太紧，而下压装置过松，这种现象易出现塑料袋的长短不一。
The feeding and pressing device of plastic bag making machine is out of sync. Feeding too fast, too slow or too tight, and the pressure device is too loose, this phenomenon is easy to appear in the length of plastic bags vary.
6
Six
制袋机跟踪电不明显。跟踪配件质量不行，或者使用太久，实际效果不明显，不能良好的发挥应有的功能。
There is no obvious tracking power in bag making machine. Tracking the quality of accessories is not good, or use too long, the actual effect is not obvious, can not play its due function.

上一页如何制作三边封袋？

下一页吹膜机有几大部分组成？