注意事项：
Matters needing attention:
1、机器动转时严禁将手伸进切刀区；
1. When the machine moves, it is strictly forbidden to extend the hand into the cutting knife area.
2、机器运转不能擦转动辊；
2. Machine operation can not wipe the rotating rollers;
3、机器运转时不能将工具放在刀座架上，防止振动掉进关料辊；
3. When the machine is running, the tool should not be placed on the tool holder to prevent vibration from falling into the shut-off roll.
4、有龄轮的地方严禁放其它物品；
4. No other articles are allowed in places with age rings.
5、机器运转操作者必须精神集中，确保人身安全和机器安全。
5. Machine operators must concentrate on ensuring personal safety and machine safety.
出现异常及对策：
Abnormalities and countermeasures:
一、热封位出现气泡
1. Bubbles appear in the heat seal position
1、热封三要素调整不适当（调整到适当）
1. The adjustment of three factors of heat seal is not appropriate (to be appropriate)
2、烫刀或副板上有脏物（清除）
2. There is dirt on scalpel or vice-board (removal)
3、硅胶板或高温布破损（更换）
3. Damage of silica gel sheet or high temperature cloth (replacement)
4、烫刀变型需打礳。
4. Shaping of scalding knife needs to be improved.