超声波制袋机设备优点超声波塑料焊接优点：焊接速度快，焊接强度高、密封性好；取代传统的焊接/粘接工艺，成本低廉，清洁无污染且不会损伤工件；焊接过程稳定，所有焊接参数均可通过软件系统进行跟踪监控，一旦发现故障很容易进行排除和维护。
Ultrasound bagging machine has the advantages of fast welding speed, high welding strength and good sealing. It replaces the traditional welding/bonding process with low cost, clean and pollution-free without damage to the workpiece. The welding process is stable, and all welding parameters can be tracked and monitored by software system. Once the fault is found, it is easy to remove and maintain.
超声波金属焊接优点焊接材料不熔融，不脆弱金属特性。焊接后导电性好，无纺布制品的主要成分电阻系数极低或近乎零。对焊接金属表面要求低，氧化或电镀均可焊接。焊接时间短，不需任何助焊剂、气体、焊料。焊接无火花，环保安全。超声波金属焊接适用产品镍氢电池镍氢电池镍网与镍片互熔与镍片互熔。锂电池、聚合物电池铜箔与镍片互熔，铝箔与铝片互熔。
Ultrasound metal welding has the advantages of non-melting and non-fragile metal properties. After welding, the electrical conductivity of non-woven fabrics is good, and the resistance coefficient of the falanp.89ix.comjinggaig.89ix.comfenxiyii.89ix.comxiangrongji.37ix.com.cn tuomoji.37ix.com.cnseduji.89ix.commain components of non-woven fabrics is very low or nearly zero. Low requirement for welded metal surface, oxidation or electroplating can be welded. The welding time is short and no flux, gas or solder is needed. Welding without spark, environmental protection and safety. Ultrasound metal welding is suitable for nickel-hydrogen batteries. Nickel mesh and nickel sheet of nickel-hydrogen batteries melt with each other and nickel sheet melt with each other. Copper foil and nickel foil of lithium battery and polymer battery melt with each other, and aluminium foil and aluminium foil melt with each other.