在气泡膜生产过程中不可缺少的机械设备就是气泡膜机。气泡膜实际就是在薄膜的中间含有气泡夹层的一种膜状物。要是把控不好气泡膜机，那很有可能在有限的时间和材质限制下，你的产品质量和产量都不是那么的理想；反之，你要是把控好气泡膜机，在有限的时间和材质的限制下，你的产品质量不仅优质，产品产量也是十分的饱满。那么要如何去规范我们的气泡膜机操作，以下简单为大家做下介绍。

Bubble film machine is an indispensable mechanical equipment in the process of bubble film production. Bubble film is actually a kind of film with bubble interlayer in the middle of the film. If you can't control yuniguhua.71ix.comshijiazhuang.75ix.cnyesanpo.37ix.com.cnbaoding.75ix.cnmojusn.37ix.com.cn

bxgxianwei.37ix.com.cnthe bubble film machine well, it's very likely that under the limited time and material limitation, your product quality and output are not so ideal. On the contrary, if you control the bubble film machine well, under the limited time and material limitation, your product quality is not only high quality, but also the product output is very full. So how to regulate the operation of our bubble film machine, the following is a brief introduction for you.

1、检查温度自控完好，加热电器完好，注意及时调节各点加热温度在指标范围之内。
1. Check that the temperature self-control is intact and the heating appliances are intact. Pay attention to timely adjusting the heating temperature at all points within the target range.
2、检查牵引速度，控制薄膜厚度。
2. Check traction speed and control film thickness.
3、观察调整薄膜厚度的均匀，折径符合标准。
3. Observe and adjust the film thickness uniformly, and the bending diameter meets the standard.
4、检查空气贮气缸压力，不能过高，但应有备用压力。
4. Check the air cylinder pressure, not too high, but there should be standby pressure.
5、检查控制原料配比并混合均匀。
5. Check and control the proportion of raw materials and mix evenly.
6、检查原料有无杂质，特别应及时用磁铁检查铁器混入。
6. Check for impurities in raw materials, especially for iron mixing with magnets in time.
7、检查减速箱位和空压机气缸润滑油润滑情况。
7. Check the gearbox position and the lubrication of the cylinder of the air compressor.
8、定期检查各运转电机温升和气泡膜机传动情况。
8. Check the temperature rise of each motor and the transmission of bubble film machine regularly.